How do magnetic van signs work?
Your graphics are printed on eco-solvent vinyl, laminated with a matte weatherproof finish, then bonded onto vehicle-grade 0.50mm magnetic sheet and precision-cut to fit your van's body panels. The panels stick to flat metal surfaces using magnetic force — no adhesive, no drilling, no tools.
Will they stay on at motorway speeds?
Yes. Our 0.50mm magnetic sheet has a pull-force rating that keeps signs secure well above 70mph. Just make sure the van surface is clean, dry and free of wax, and the sign is placed flat against the panel with no air gaps.
Will magnetic signs damage my paintwork?
No. There's no adhesive involved — the panels sit on top of your paint magnetically. We recommend removing them at least once a week to clean the van surface and the back of the sign. This prevents moisture and dirt build-up, which is the only thing that could cause issues over time.
Can I remove them for personal use?
That's one of the main benefits. Take them off in seconds when you're off the clock and put them back on when you're working. No tools needed.
Can I swap them between vehicles?
Our signs are precision-cut for your specific vehicle, so they'll fit perfectly on the same make and model. If you switch to a different vehicle, you'd need a new set — but we can reuse your approved design.
Do they work on all vans?
They work on any flat steel body panel. They won't stick to aluminium, fibreglass, plastic or heavily contoured panels. Most UK commercial vans (Transit, Sprinter, Transporter, Vivaro etc.) have steel panels, but it's worth checking if your van has any non-metal sections where you'd want signs.
Can I put them through a car wash?
No — always remove magnetic signs before going through an automated car wash. The brushes and water pressure can dislodge or damage them.
How should I store them when they're not on the van?
Store flat on a clean, dry surface. Never roll them tightly as this can warp the magnetic sheet and weaken the hold. We include a care guide with every order.
How long do magnetic signs last?
The print and lamination are rated for 5+ years. The magnetic sheet itself will last for years with proper care. We recommend replacing signs if you notice any reduction in magnetic hold, which typically happens after 2–3 years of heavy daily use.
What if a sign gets damaged or I need a replacement?
We keep your design on file. Reordering is quick — just get in touch and we'll reprint from your approved artwork.